Views: 67 Author: Site Editor Publish Time: 2022-06-20 Origin: Site
RGB LED pixel light uses a multi-stage connection combination of professional waterproof connectors that can form different shapes of dots, lines and surfaces to display text patterns.
Why choose RGB LED pixel light?
What should we pay attention to when using RGB LED pixel light?
How do I use RGB LED pixel light correctly?
(1) Good earthquake and impact resistance
The basic structure of RGB LED pixel light is a piece of electroluminescent semiconductor material placed on a conductor frame and then sealed with epoxy resin around it. There is no glass housing in the structure, and it does not have to be like incandescent or fluorescent lamps in the lamp. The tube is evacuated or flushed with a certain gas, so RGB LED pixel light has good impact resistance, which makes it easier to manufacture, transport and use.
(2) Strong directivity
Compared with the conventional light source, the light emitted by RGB LED pixel light is directed, and most of the light emitted by the LED can be directed to the illuminated surface, and the utilization is much higher than the conventional light source.
1. Note that the power supply matches the working power of the RGB LED pixel light spot light source. Do not connect the wrong power supply. Special attention should be paid to the fact that the rated voltage of the LED spot light source is DC5V/DC12V/DC 24V (when connected directly to 220V, the spot light source will burn through completely, causing mostly burnout RGB LED pixel light spot light source and control chip)
2. Do not connect the positive and negative poles of the power output to the positive and negative poles of the point light source RGB LED pixel light in reverse polarity or short circuit, otherwise the IC of the point light source will burn through and the signal cannot be transmitted.
3. When plugging in and out of the SD card, be sure to disconnect the controller's power supply, otherwise the SD card can easily be burned.
1. When using RGB LED pixel light to create characters, the hole diameter of the LED spot light source is 12mm by default. If the hole diameter is too small, the light can not be forcibly inserted, which will easily detach the lamp pins, resulting in a dead color of the lamp. and IC cannot transmit.
2. Do a good job of sealing when the RGB LED pixel light is connected to the power cable and signal cable.
3. The installation method of RGB LED pixel light spot light source should take into account the convenience of later maintenance. The arrangement of controllers, electrical appliances, etc. is economical, sensible and maintenance-friendly.
RainMin also offers its own advanced lighting control software LightShow Pro, which can be used with any of the RainMin RGB controllers to create your own effects or program the lights with music. Of course, you can also use the other software that supports Art-Net protocol such as Xlights, Madrix.
