Publish Time: 2022-07-22 Origin: Site
RGB LED Light Tube is a new light bar product that replaces neon lights on the market. It is easy to install and suitable for any accessible place. RGB LED Light Tube can realize the effects of flowing water gradient, chasing, scanning, displaying images, texts, animations, etc. The images are clear, colorful, and dynamic and realistic.
How to install RGB LED Light Tube indoors?
How to install RGB LED Light Tube outdoors?
What is the power connection method of RGB LED Light Tube?
When the RGB LED Light Tube is used for interior decoration, installation is very simple since it does not have to withstand the wind and rain. There is a self-adhesive 3M double-sided tape on the back of each RGB LED Light Tube. When installing, you can directly tear off the sticker on the surface of the 3M double-sided tape, and then fix the light bar in the place to be installed, and press it flat with your hands. . As for some places that need a corner or are long, what should I do? It is very simple, the RGB LED Light Tube is a circuit structure composed of 3 LEDs in series and parallel, and every 3 LEDs can be cut off and used alone.
The outdoor installation of RGB LED Light Tube will be exposed to wind and rain. If 3M glue is used for fixing, the 3M glue will be reduced over time and the RGB LED Light Tube will fall off. Therefore, outdoor installation is often fixed with card slots. Where it needs to be cut and connected, the method is the same as the indoor installation, except that it needs to be additionally equipped with waterproof glue to consolidate the waterproof effect of the connection point.
The general voltage of RGB LED Light Tube is DC 12V, so it needs to use a switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED strip. If you don't want each RGB LED Light Tube to be controlled by a power supply, you can buy a switching power supply with a relatively high power as the total power supply, and then connect all the RGB LED Light Tube input power supplies in parallel (if the wire size is not enough, you can extend it separately), unified by the main switching power supply. The advantage of this is that it can be controlled centrally, but the inconvenience is that the lighting effect and switch control of a single RGB LED Light Tube cannot be achieved. The specific method can be judged by oneself.
I hope you can understand that the above are several common RGB LED Light Tubes on the market. If you need to order related products, you can contact RainMin Co., Ltd. — the expert in this area.